CONVISION CC-8*** Cameras User Manual
27
4
ADDING A CAMERA TO AN NVR
The following gives some basic guidance for adding CONVISION MP cameras to an NVR system that
supports RTSP streaming. Please refer to the NVR instructions for specific details on how to add and
administer cameras for the NVR system.
When adding a camera to an NVR, the NVR will likely require 3 configuration parameters from the
camera:
An RTSP URL
An HTTP Port Number
The administrator username and password
4.1
RTSP URL
The RTSP URL will likely be the Profile 1 stream from the camera which by default will be in the
following format:
rtsp://[
IP ADDRESS
]/rtpvideo1.sdp
This assumes that the default port, 554, is being used, the “rtpvideo” access name is defined, and
camera profile stream 1 is being used.
Below is the Stream Setting page which defines the RTSP port and the Access Name.
If the Access Name and/or RTSP Port have been changed, then specify the RTSP URL in the
following format:
rtsp://[
IP ADDRESS
]:[
PORT#
]/[
ACESSNAME
]1.sdp
If “rtpvideo” was changed to “ev”: rtsp://10.1.21.138:555/ev1.sdp
