background image

Page 5 of 12 

3. Safety- and maintenance- references 

 

 

Never open the equipment. It contains no parts to be waited. In the 
event of an error please give the smoke detector to your dealer. 

 

 

Operate the equipment only in interiors and avoid the  influence of 
dust, strong draft of air and direct sun light. 

 

 

Clean the equipment with a dry linen cloth, which can be easily 

dampened. 

 

 

Never use any kind of cleaning agents. 

 

 

The system may not be kept / operated within the access range by 

children. It i s not a toy!  

 

 

 

4. Installation places 

 
Smoke detectors should be installed in accordance with the NFPA Standard 

74 (National Fire Protection Association, Batterymarch Park, Quincy, MA 
02169). 

 
In principle it is advisable to install several smoke detectors in the building 
and/or in the dwelling. 
 

In any case at least one smoke detector should be installed in each floor of 
buildings with more than one floor.  
Only like that a punctual and thus effective warning is possible when a fire 
begins. 
 

In any case  one smoke detector must be installed in the way from the 
sleeping area to the exit (corridor and/or staircase). 

 
Also take care that the smoke detector can be loudly heard through a closed 

door from the sleeping room! (Otherwise you will not be  waked up during a 

fire alarm!). 
 

 
 

Summary of Contents for HOMEGUARD MS8000













Reviews: