background image

Specifications

Video Type: 

NTSC/PAL. 

Video Outputs:

 Composite (RCA socket) & S-Video 
(4pin mini-din socket), RGB (9pin mini-
din socket). 

PC/Monitor Connections: 

15 pin D-sub socket (Y cable) 

Power Supply: 

5vDC 

Power Source: 

PC USB or PS/2 port 

Size: 

13cm(w), 8.3cm(d), 3.2(h) 

Weight: 

0.128gms 

Technical Tips

The following are problems that might arise when using the PC to TV 
converter, and possible solutions of them.

Q: How can I enhance the display quality?
A: 

You can usually lower the TV contrast and sharpness control at the best 

position, you can get a very good picture. To have the best effect, lower 
the contrast control to minimize the flicker effect.

Q:

 

I connect with a NOTEBOOK PC, no output is displayed on TV.

A: 

Check your computer hardware operating manual to enable the VGA 

port or "OUTPUT". (Many Notebook computers have 3 settings, VGA 
external only, VGA internal only, and VGA internal & external 
simultaneously)

Q: Can I use multiple televisions to view the same image from my 
computer?
A:

 Yes, you may connect one television to the next using a composite 

video cable or an S-Video between the 

"VIDEO IN" 

and "VIDEO 

OUT" ports. We recommend using no more than six televisions 
because of signal degradation.

Summary of Contents for Ultimate XP








Reviews: