•
Input system select button
Each depression of the button steps through a series of video systems and auto
detection mode. These range from Auto, N3, N4, PAL, PAL M, PAL N and SECAM.
•
Output system select button
Each depression of the button steps through a series of video systems. These range
from N3, N4, PAL, PAL M and PAL N.
Rear Panel
1.
Input-
This is the video input port. Connect this to your input device using a
composite RCA connector cable.
2.
Power-
This is the power supply input port. It is to be used with the power pack
supplied.
3.
Output-
This is the video output port. Connect this to your output device using a
composite RCA connector cable.
Connection and Installation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
-
Using your connector cable connect the output port (Number 3 on the rear panel) to
the output device (Video, TV).
-
Using your connector cable connect the input port (Number 1 on the rear panel) to the
input device (video, satellite receiver, camcorder).
-
Select the video input system; you may select AUTO, N3, N4, PAL, PAL M, PAL N
or SECAM. When an input signal has been chosen, the indicator will light up.
-
Select the video output system; you may select N3, N4, PAL, PAL M or PAL N.
When an output signal has been chosen, the indicator will light up.
Once all connections are complete please connect the power supply provided to the
power socket.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
Phone +61 249689313 Fax +61 249689314
www.converters.tv
