Introduction
The wireless HDMI transmitter and receiver boxes use baseband
technology with Wireless High Definition Interface (WHDI) to deliver
uncompressed HD audio and video. It can transmit within a distance of 20
meters while maintaining superb, wired equivalent quality and reliability
with little to no lag. Both transmitter and receiver boxes come with built in
antennas, making them a sleek addition to your Home or Office. These
units can also convert analog and digital signals to HDMI V1.2 in order to
be shown on displays.
Applications
Multi format input to wireless HDMI output
Integrate your home entertainment system
Showroom Display
System
Requirements
Input source equipment(s) and output display device(s) with HDMI cables.
Features
Uncompressed HD audio/video wireless transmission at wire-
equivalent
quality
Supports most video resolutions including 480i/p, 576i/p, 720p, 1080i,
VGA@60/72Hz, SVGA@56/60/72Hz, XGA@60/70Hz and
1080p@24/30fps
Supports analog/digital video/audio input and HDMI output to display
HDCP keysets allows each HDMI input to independently connect to
an HDMI display
Supports 3D comb filter and 3D noise reduction (DNR)
Supports 3D noise reduction (DNR)
Supports analog format conversion from 480i/576i to 480p/576p with a
hot key on the transmitters front panel and remote control
Operational within a distance of 20 meters, no direct line of sight
required.
Real time link, with a lag of less than 2 milliseconds.
Strong 256-bit AEC based encryption for security
Video Data Rates 1.5Gbps
5GHz licensed band, MIMO(Multiple Input Multiple Output) RF
Supports CEC bypass and input switch functionality
Fully HDCP Compliant
Operational in either Unicast or Broadcast mode
Auto shutdown when one of the devices is turned off
Instant signal transmission with a timing change of less than 10
seconds.
Control Channel allows two-way communications of 10Kbps
Audio support PCM (2CH), DTS (5.1CH) & AC3 (5.1CH)
