Back Panel
1. RS232:
Connect to a PC or RS-232 control system with a D-sub 9-pin cable for RS-
232 control.
2. SERVICE:
Manufacturer use only.
3. MDP IN:
Connect to a DisplayPort source device such as a PC/Laptop with a mini-
DisplayPort cable.
4. Dual-Link DVI IN:
Connect to a DVI source device such as a PC/Laptop with a DVI cable.
5. PC/COMP IN:
Connect to a VGA source such as a PC/Laptop source equipment with a D-
sub 15-pin cable or to a Component Video source with a D-sub 15-pin to 3
RCA phono adaptor for component video signal input.
Remote Control
1. POWER:
Press to turn the system ON/OFF.
2. VIDEO IN:
Press the required key to directly select
the video source (DVI/
MDP/PC/COMP).
3. AUDIO IN:
Press the required key to directly select
the audio source
(AUDIO/OPTICAL/MDP) or to MUTE the
system.
4. MENU:
Press this button to ENTER the OSD
menu.
5. EXIT:
Press this button to EXIT the OSD
menu.
6. ENTER and ▲/▼/◄/►:
Press ENTER button to confirm the
selection
and press the arrow keys to navigate the OSD menu.
7. INFO:
Press to show the input and output resolution information.
8. OUTPUT:
