Operation Controls
and Functions
Front Panel
1. MENU/ENTER:
Press this button to ENTER the On-screen Display (OSD) menu. Press
again to confirm the selection.
2. MINUS (-)/IN:
When in the OSD menu, press this button repeatedly to move down
through the menu. When not in the OSD menu, press this button to quickly
select the required input.
3. PLUS (+)/OUT:
When in the OSD menu, press this button repeatedly to move up through
the menu. When not in the OSD menu, press this button to quickly select
the required output resolution.
Note:Pressing '−' (MINUS) and 'ENTER' simultaneously will immediately
switch the output resolution of the device to 720p@60 Hz. Pressing '+'
(PLUS) and 'ENTER' simultaneously will immediately switch the output
resolution of the device to XGA.
4. OPTICAL IN:
Digital audio TOSLINK input. Use this input to connect to a source with an
OPTICAL cable.
5. AUDIO IN:
Analog audio input. Use this input to connect to analog source with a
3.5mm mini-jack cable.
6. OPTICAL OUT:
Digital audio TOSLINK output. Use this output to connect to an Amplifier or
Active Speakers to an optical digital input with an OPTICAL cable.
7. AUDIO OUT:
Analog audio output. Use this output to connect to Active Speakers or an
Amplifier with a 3.5mm mini-jack cable.
8. HDMI OUT:
Connect to a HDMI equipped TV/monitor for display of the source signal.
9. IR Window:
Receives the IR signal from the supplied IR Remote only.
10. DC 5V and POWER LED:
Connect the supplied 5V DC power supply to the unit and plug the power
supply to AC wall outlet. Once the system turns on the LED will turn RED.
