Operation Controls
and Functions
The following sections describe the hardware components of the unit.
Front Panel
1. POWER
Press to power on the system, press again to turn the system to standby.
2. IR SENSOR
3. MENU/EXIT
Press to enter MENU mode and press again to EXIT the menu or return to previous page.
4. - and +
Press to toggle through various control or setting values.
5. OUTPUT
Select output HDMI source monitors 1~4
6. INPUT
Select Input HDMI source equipment A~D (Bluray, PC, Xbox. PS3
7. Dual Matrix
Select operation mode for display configuration
8. LOCK
Locks display buttons to current selection
9. SAVE
Save current display configuration
10. RECALL
Set last saved display configuration for use
Back Panel
1. HDMI INTPUT
Connect the input source equipment up to 4 display monitors simultaneously
2. HDMI OUTPUT
Connect the output source equipment up to 4 display monitors simultaneously
3. USB SERVICE ONLY
Connect to pc for firmware and software updates. Manufacturer use only
4. RS-232
Connect 3.5mm phone jack to D-Sub 9pin adaptor to the PC/Notebook device for RS-232
control.
5.DC 12V
Plug the 12V DC power supply into the splitter and connect the adaptor to AC wall outlet.