HARMONIZATION OF DISPLAYS (THERMOSTAT / THERMOMETER)
NOTE
This operation is optional.
There may be a difference between the readings displayed on
the device and on your thermometer. It is possible to harmonize
both displays.
Procedure:
•
This setting can only be performed if your device
is set between 17 and 23°C.
•
All doors and windows must be closed.
•
Wait for the temperature in the room to stabilize (at least
6 hr), and avoid going in and out of the room as much as
possible.
•
The control thermometer should be placed in the middle of
the room at 1,20 m (3’ 11’’) from the floor. Do not place it
on furniture.
PRESS
ACTIONS
First, make sure that the thermostat
is in COMFORT mode.
Press for
3 seconds
.
You may encounter these two scenarios.
A. The set point temperature flashes.
Harmonization is possible.
Use these keys to adjust the temperature.
Confirms the previous step.
Exits the adjustment mode and returns to normal
mode.
EXAMPLE
Your thermometer shows 20.5°C and your thermostat 19°C. You
can correct by +1.5°C using the “+” key and confirming with the
“MANUAL” key.
B. The display indicates “NONS”.
Harmonization is not possible.
You must wait until the temperature stabilizes.
NOTE
If you do not perform an action on the “+” and “-” keys within
15 seconds, the display will return to its initial position.
6.
DIA
GNOS
TIC ASSIS
TANCE
SOL
VING MINOR PR
OBLEMS
