17
Should the heater overheat, an automatic thermal cut out will turn the heater off. The
heater will reactivate once the heater has cooled. It will continue to cycle on and off
automatically until the reason for overheating is removed.
In the event of abnormal operation, turn off the device. Check that the grilles are not
blocked. Clean if necessary.
WARNING:
Disconnect power and allow the unit to completely cool before attempting
any maintenance or cleaning to reduce the risk of fire, electric shock, or injury to persons.
To keep the appliance clean, regular maintenance is recommended. To remove dust, use
a soft cloth. To remove a stain, dampen the cloth.
For best performance and maximum efficiency of the appliance, it is recommended to
regularly remove dust and debris that may accumulate on the grilles of the FLB/FLB+
panel convector.
NEVER USE ABRASIVE OR ACETONE-BASED PRODUCTS, AS THEY COULD
DAMAGE THE EPOXY COATING.
ALL SERVICING ON CONVECTAIR APPLIANCES MUST BE CARRIED OUT WITH THE
POWER OFF, AND BY QUALIFIED AND AUTHORIZED PERSONNEL.
Overheat Protection
Maintenance
Summary of Contents for 51FLB 00-C10-BB
Page 2: ...2...
