12
-
CONVECTAIR
recommends that devices be installed by a master
electrician, in accordance with applicable national and local codes.
- The device must be connected to a 240 volt, 60 cycle circuit.
Disconnect the power before making any connections to avoid
electric shock or damage to the device.
- To avoid short circuits, turn off the power at the electrical panel
before any installation or repair.
- If the power supply wires of the device are damaged, they must be
replaced by the manufacturer, its after-sales service, or a similarly
qualified person in order to avoid a danger.
!
CONNECTION DIAGRAM
- Turn off the power to the heater before opening.
- This heater must be grounded.
- A circuit breaker is necessary for the installation; do not load it to more than 80% of
its capacity.
- Secure the device to the back bracket before turning it on.
Electrical Wiring
B=BLACK W=WHITE G=GREEN L1=LINE 1 L2=LINE 2 G=GROUND
Powe
r
S
uPP
ly
Hea
ter
B
L1
L2
W
G
G
Summary of Contents for 51FLB 00-C10-BB
Page 2: ...2...
