翿
STEP BY STEP ASSEMBLY
8
BATTERY ASSEMBLY FOR STS600E / STS600E-D
3
Engage the brakes. Remove the bolts
from the bottom of the mast and base. Pull
the Mast to an upright position. Re-insert
the bolts into the holes at bottom of the
mast and tighten the nuts.
1
Attach boom to top of mast.
Re-insert the bolts into the
holes at bottom of the mast
and tighten the nuts.
A.
Attach the bottom of Actuator
to the bracket on the Mast and
insert pin. Insert keeper ring
through hole in pin to secure base
of actuator.
B.
Attach the top of the Actuator to
the bracket on the Boom and insert
pin. Insert keeper ring through hole
in pin to secure actuator to upper
bracket.
2
翿
B.
A.
ASSEMBL
Y
ASSEMBL
Y
9
4
Install the control box. Slide the control box over and onto the metal
tab mounted at the bottom of the Mast. Line up the control box with the
hole at the top of the mast and insert the screw to hold the
control box in place. Secure the control box by turning the lock
mechanism into the lock position.
