background image

OPERA

TING 

INSTR

UCTIONS

•  Fit sling as described in “Fitting ConvaQuip Stand Assist Sling”.
•  Push lift towards patient. Open the base of the lift to go around the chair. Apply the 

brakes in both rear casters.

•  Position patient’s feet on the foot platform and knees against the knee pad.
•  Attached the sling straps to the hooks.
•  Have the patient’s hands holding the handles. For patients who cannot hold the 

handles, have them hold their arms around the chest.

•  Press the “UP” button on the hand control.
•  Before the patient’s body is lifted from the chair, stop and make sure the sling is 

secured and patient’s knees are against the knee pad.

•  The patient should be comfortable with the pressure under the arms. If not, adjust 

the sling and try another loop option to release pressure. 

•  Press the “UP” button until the patient’s body has completely left the chair.
•  Transfer to another object can be done at this position without the patient attending a 

full standing position.

•  Release the brakes, close the base, and pull the lift away from the chair.
•  Lower the patient to the object intended.
•  To lift patient in a standing position, continue to lift until the patient’s knees are 

locked in a standing position.

•  At the standing position, patient’s knees may move away from the knee pad.
•  Release the brakes, close the base, and pull the lift away from the chair.
•  Lower the patient to the object intended.
•  Reverse the above procedures when lowering the patient to the chair.

  8LIFT AND TRANSFER FROM WHEELCHAIR

ConvaQuip TOILETING SLING

The ConvaQuip Toileting Sling can be used with the ConvaQuip to lift a patient in a sitting 

position. When in use the ConvaQuip Toileting Sling supports the client under the thighs 
and across the mid-back area.

Fitting the ConvaQuip Toileting Sling

 Slide the sling down patient’s back to lumbar position.

•  Draw shoulder straps under the arms and around the chest into the front.
•  Draw Velcro waist belt around waist and press together to fasten.
•  Draw each leg support under the thigh.
•  Crisscross leg straps by feeding one of the leg straps through the other strap.
•  Attach shoulder straps to hooks in upper ends of the lifting arms.
•  Attach leg straps to hooks in the lower ends of the lifting arm.

The ConvaQuip Toileting Sling is not suitable for patients who 
have involuntary movements or patients with limited postural 

LIFT AND TRANSFER FROM COMMODE

control.

OPERA

TING 

INSTR

UCTIONS

Shoulder strap

Velcro waist belt

Leg strap

Leg strap loop

Shoulder strap loop

19

• 

18

Summary of Contents for STS600E














Reviews: