Assembly
Model 724
A
Bedside Commode
ConvaQuip Ind., Inc.
Bottom Half
Top Half
Set top half on bottom half.
Slide down over the tubing until the
tubing will rest on all four snap buttons.
Close up of tubing resting on snap button.
Press in the snap button on each leg and barley
push down the tubing, just enough for the
button to disappear. Now slowly and in small
increments move from leg to leg pushing the
tubing down.
If you push too far on any leg, it will bind up
and you will have to even them out again by
pulling it up and starting over. Once all four
tubes have bottomed out, the button will
reappear and snap into place. When all buttons
are protruding through the button hole, the
commode is ready to use.
