06
3. To gain access to the inside of the
appliance remove the rear panel by
disengaging the clips at the top.
Pivot the rear panel backwards and
lift it off. Take care when
removing the rear panel as water
may drip from the moisturizing pad
secured to the inside of the panel.
4. Wash the moisturizing pad with a
gentle spray of water while it is still
in the rear panel. Do not use a
high pressure hose to clean the pad.
Replace the pad if salt has built-up
on the pad as it will reduce the
ClimateWizard s performance.
5. Clean the tank and the perforated
water strainer located in the tank by
using a damp cloth and mild
13
ILL1267-A
14
ILL1268-A
household detergent. Do not use
abrasive cleaners or solvents.
Remove any foreign matter. This
will ensure that the strainer does
not clog up during operation.
6. If the pump drive belt needs
replacing, remove it from the
pulleys. Ensure that the belt is
replaced in the same orientation
as shown in the diagram so that
the pump rotates in the right
direction.
7. Replace the rear panel by placing
the bottom of the rear panel in the
tank and pivoting it forward until
the clips engage.
ILL1269-A
14
15
16
Manual
15
ILL1280-A
12
13
12
Summary of Contents for Climate Wizard
Page 1: ......
