STANDARD METAL CLIP (FIG. 9) AT LOWER END OF SHOULDER BELT AND AT END OF
OPTIONAL WHEELCHAIR-ANCHORED LAP BELT USED TO CONNECT TO PIN/BUSHING
(FIG. 10) ON LAP BELT OR ON WHEELCHAIR SECUREMENT POINT BRACKETS.
12
Fig. 6
Fig. 7
Fig. 8
CONVAID
TRANSIT GUIDE
Fig. 9
Dimensions shown
in inches.
Fig. 10
polymer sleeve
metal
bracket
metal pin
.200 R
+/- .005
1.00 +/- .125
.365 +/- .005
.890 +/- .125
Dimensions shown in inches.
PREFERRED ANGLES OF FRONT AND REAR TIEDOWN
STRAPS (TOP) AND PREFERRED LOCATIONS OF
FLOOR ANCHOR POINTS (BOTTOM).
Side view
11.75 - 20.00
vehicle floor - front
14.00 - 28.00
51.00 +/- 1.00
Top view
30-45
O
range
45-60
O
range
FIG. 7: FRONT TIEDOWN STRAPS
ANGLED AWAY FROM SIDES OF
WHEELCHAIR.
FIG. 8: CORRECT POSITIONS OF
SHOULDER AND LAP BELT RESTRAINTS
AND WHEELCHAIR TIEDOWNS.
