GB
24
Self-closing hatch
The insert can be supplied with a self-closing hatch. First open
the hatch according to section
“Cleaning the hatch glass”,
then
remove the four screws to release the Upper member. Remove
the two screws that hold the spring assembly, install the weight
to the upper member and reinstall the spring assembly in the
upper screw holes. Reinstall the Upper member using the four
screws. The insert can now be supplied with the self-closing
hatch.
Installing removable parts
Removing the hatch from the insert facilitates the installation
of the hearth surround on the I 20. If the insert is recessed,
removal of the hatch is made easier if the damper knob is
removed. After the catches have been opened the hatch will fall
forward to a limit position. Now lift the hatch and at the same
time move it to the left so that the right side releases from its
mounting, then tilt the hatch out. Assembly takes place in the
reverse order.
2
1
Spring assembly
Weight
Upper member
PRIOR TO INSTALLATION