Contura C 630, Installation Instruction, Page: 4 / 16

1
2
3
4
52
GB
Effect 3-9 kW
Nominal effect 6 kW
Efficiency up to 79%
Model 630
Height (mm) 1544
Width (mm) 551
Depth (mm) 478
Weight (kg) 156
Heat tank (kg) 85
Type approved in accordance with:
European standard EN-13240
Swedish type approval
Norwegian standard NS 3059, SINTEF: 043-104
German standard DIN Plus, RRF - 40 12 3015
Removing the loose
parts
If the insert needs to be put down
to be moved, loose components
should be removed. When the stove is
installed reinstall the components in
reverse order, see page 62.
1 Fire bars
2 Grate disc
3 Heat deflector
4 Firebricks (Vermiculite).
Installation by authorised
technician
This manual contains instructions about
how the stoves must be assembled and
installed. To ensure the function and safety
of the stove, we recommend that the
installation is carried out by an authorised
technician. Contact one of our dealers who
can recommend suitable fitters.
Building permission
These main insructions may give guidance
which would contravene national building
regulations. Please refer to supplementary
instructions or ask your local authority for
advice regarding building regulations.
Before installing a stove or erecting a
chimney it is necessary for you to make
a building application permission to your
local authority.
Structural support
Check that the wood joists are strong
enough to bear the weight of the stove and
chimney. The stove and chimney can usually
be placed on a normal wooden joist in a
single occupancy house, if the total weight
does not exceed 400 kg.
Floor plate
Due to the risk of falling embers, a
flammable floor must be protected by a
hearth plate. It must extend 300 mm in
front of the stove and 100 mm on each side
of the stove, or have a 200 mm extension
on each side of the opening. The hearth
plate can consist of natural stone, concrete,
metal plate or glass. A painted metal
or glass hearth plate is available as an
accessory for these models.
Important to remember!
Technical details
FACTS