Remote-i Net
Reconfiguring the Remote-i Net for use without a DHCP server
The
Remote-i Net
leaves the factory programmed to find a DHCP server. If your network does not have
a DHCP server, it will be necessary to reconfigure the
Remote-i Net
Before reconfiguring the
Remote-i Net
, you should obtain the following information from the person
responsible for your local network:
y
free fixed IP address for the use of the
Remote-i Net
y
sub-network mask
y
IP address of the local network router
Having obtained this information, use a “RiNetConfig” program to reconfigure your
Remote-i Net
.
It is
available on the same menu as the PROGuard program.
Remote-i Net Configuration Program
The
Remote-i Net
configuration program is installed through the CommCenter installation procedure.
The application is available in the following folder: ..\Program Files\Contronics\Common Files\Remote-i
Net.
Once installed, the configuration program may be activated from the
Programs
menu, accessed by the
Windows
®
Start
button
As it starts, the program will display its main screen:
6
Contronics
Figure 3 - Start Menu / Programs.
Figure 4 - Initial screen of the Remote-i Net configuration program.
