CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
8
13)
Preheat - Relay will be active during programmed preheat period. Used to drive a preheat
relay.
Digital Function Activation
1) Off / Always / Run
– Describes when the parameter will be monitored for alarm conditions.
Run refers to when the engine is running. Off disables the alarm conditions. Always enables
the alarm constantly regardless of engine state.
2) Alarm Delay
– The time period, after Sender Check Bypass, that the parameter must be on
the alarm condition before the alarm becomes latched.
CONTROL PANEL RELAY OUTPUTS
The panel has three relay outputs available to signal other devices based on predefined events.
These Outputs can be used for a number of purposes including engine operation or driving an
audible alarm.
Input
Heading
Default
Connector
Pin
Relay 1
B
1
Function
Pre & Alarm
Polarity
Positive
Initial State Off
Input
Heading
Default
Connector
Pin
Relay 3
B
6
Function
None
Polarity
Positive
Initial State Off
