Controls MVP-A6350, Product Manual

Page: 9 / 16

CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
- 8 -
CONTROL PANEL DIGITAL INPUTS
The panel has five digital inputs available to monitor other components, senders or signals. The
analog input is preset to fuel level and cannot be configured. The digital inputs can be used for a
number of purposes including alarms and shut downs.
Input Heading Default Options Connector Pin
Digital 1
Normally Open Open / Closed
A 4
Function None
Message None
Check Off Off / Always / Run
Digital 4
Normally Open Open / Closed
B 3
Function Derate to Idle
Message None
Check Run Off / Always / Run
Digital 5
Normally Open Open / Closed
B 4
Function None
Message None
Check Off Off / Always / Run
Digital 6
Normally Open Open / Closed
B 5
Function Throttle Down
Message None
Check Always Off / Always / Run
Digital 7
Normally Open Open / Closed
B 2
Function Throttle Up
Message None
Check Always Off / Always / Run
Digital Function
1) Pre Alarm – Warning message will be displayed along with a yellow lamp when active.
2) Throttle Up – Mimics the front panel key press for speed control.
3) Throttle Down - Mimics the front panel key press for speed control.
Digital Function Activation
1) Off / Always / Run – Describes when the parameter will be monitored for alarm conditions.
Run refers to when the engine is running. Off disables the alarm conditions. Always enables
the alarm constantly regardless of engine state.
2)
Alarm Delay – The time period, after Sender Check Bypass, that the parameter must be on the
alarm condition before the alarm becomes latched.