Controls KS-105, Product Manual

Page: 8 / 15

7
LAMP OPERATION
The KS-105 comes with five high intensity LEDs lamps.
Oil Pressure Lamp
Oil pressure lamp turns ON when the oil
pressure switch is “closed” indicating a
low oil pressure condition (after initial 10
second bypass period on engine start).
Hour Meter
Displays engine run hours.
Coolant Temperature Lamp
Coolant temperature lamp turns ON
when the engine temperature switch is
“closed” indicating a high engine
temperature condition.
Alternator Charge Lamp
Alternator charge lamp turns ON when
alternator excite signal is received from
the alternator.
Glow Plug Lamp
The glow plug lamp turns “ON” when
the glow plug signal is being sent from
the KS-105. The glow plug signal is
initiated when the key is in the “PRE-
HEAT” position or the “CRANK”
position. The pre-heat period is either
4 or 10 seconds depending on the
pre-heat interval select circuit being
grounded or not.
Altitude Compensation Lamp
The altitude compensation lamp turns
ON when the altitude compensation
signal is received from the altitude
compensation module mounted on
the engine.