Controls 15-D0410, Instruction Manual

Page: 48 / 68

Manuale di Istruzione
Instruction Manual
27/10/2010 15-D0410-/Y -/Z Rev. 1 EN
44
5.1 Operator’s preventive maintenance
The inspections made directly by the operator are the following:
Action Who When
Check to ensure that there is no
external damage to the equipment,
which could jeopardise the safety of
use Operator Before every working session
Clean the equipment and the sieves
from residuals of aggregates Operator At the end of each working
session
General inspection Operator Weekly
Check status of the emergency
button Operator Weekly
Check status and functioning of the
operator's command Operator Weekly
Check that all label and rating
plates are intact and properly
attached Operator Monthly
Grease the ball located below the
base plate (see chapter 5.1.1) Operator Every 6 months
Lubricate the blocks of the rubber
spherical seat (seechapter 5.1.2) Operator Every 6 months