MVH36C models
1
2
3
4
-
Remove the cover
-
Rotate the pivot 1/2 turn counter-clockwise and lock it
by a spanner as shown in the picture.
Lock the stem extension
c
on the rack placing the indicator
disk
a
and the jagged washer
b
.
-
Lower the valve stem
-
Screw the extension on
the valve stem until the
groove on the actuator base
matches with the one on the
valve, so lock the extension
tightening the nut on the
stem.
Assemble the actuator to the valve by U-bolt and
the two nuts with the built-in washer.
1st Issue rev. e
01/12
3
DIM156e
