Preparing a VFC400-WiFi for first use
VFC400-WiFi User Guide
10
Configuring the VFC400-WiFi for logging
Before a VFC400-WiFi logger can be used, it must be configured with the parameters required for
l
starting and recording temperature values
l
triggering alarms
l
connecting to the local WiFi network
l
connecting to your cloud account
This is done using Control Solutions VTMC software, which can also be used for downloading and analyzing
data. Control Solutions VTMC includes the LogTag
®
Online Connection Wizard, which will allow you to set
wireless and network settings and register the VFC400-WiFi against your Control Solutions Online account.
l
Start the Control Solutions VTMC software.
l
Remove the protective cap from the logger's USB socket and plug the Micro USB end of the cable into
the socket. Plug the other end of the cable into a USB socket on your computer and wait for the drivers to
be installed.
l
Slot the logger into the interface, contacts facing down and towards the rear of the interface.
l
From the menu click LogTag - Configure; Control Solutions VTMC will display the contents of your
VFC400-WiFi for reviewing or editing configuration settings.
Standard Configuration Settings
The standard configuration is similar to those of other LogTag logger products and includes settings such as
User ID
,
start method
,
pre-start recording
,
logging interval
and
duration
,
start delay
, and
password
.
Adjust the settings as required. For detailed information about each parameter please read the section about
Configuring a LogTag for logging in Control Solutions VTMC’s User Guide or press F1 for help.
