User's Manual
CS1171 Hand-Held Programmer
Page 35 of 56
Control Solutions LLC
Options Sub-Menu
Parameter
Description
RVS beep
When set to
On
,
enables a horn beep (if equipped) when the
controller is in reverse.
Uni rvs beep
When set to
On
,
enables a horn beep (if equipped) when the
controller is in reverse
– for unidirectional throttle only.
Beep error
When set to
On
,
Beep
enables a horn beep (if equipped) when a
controller error code is present. The horn will pulse out the error
code, similar to the LED modulation for an error code.
Soft qstop
When set to
On
, asserting the quick stop input triggers a
programmable softer stop. When set to
Off
, asserting quick stop
triggers an abrupt stop.
Debug volts
When set to
On
, a sample battery voltage is displayed. This is
used for battery related testing and problem diagnosis. Turn
off
when finished with diagnostics.
CHG to DRV
When set to
On
, the controller jumps to drive mode when charging
completes. If enabled, the key must be on to jump to drive mode.
When set to
Off
, the controller turns off when charging completes.
Diagnostics
When set to
On
, the controller performs general power-up self-
diagnostics. Diagnostics are not performed when powering up in
charge mode.
Brake diag
When set to
On
, electromagnetic (EM) brake diagnostics are
enabled at power-up and also during operation. When set to
Off
,
diagnostics are not performed on the EM brake output. Most
applications with an EM brake require this option to be enabled as
part of compliance standards.
Fast curlim
When set to
On
, the current limit characteristic of the controller will
recover quickly in response to motor current, versus a slower
cutback and recover.
Step curlim
When set to
On
, the current limit decay function changes to an
abrupt step function, such that after a time defined by
Cur time
;
the current limit will drop from
Cur lim hi
to
Cur lim lo
. When set
to
Off
, current limit will follow a normal linear decay function. See
Flsh chgstrt
When set to
On
, the status LED will flash when charging starts.
