4
Motion sensor sensitivity adjustment
The sensitivity of the motion sensor is adjustable in the
Properties
page in Composer Pro. Change the setting by moving
the sensitivity slider higher (to the right) or lower (to the left).
When the sensitivity is set lower, more movement is required
to trigger the motion sensor. We recommend that you set the
sensitivity to a middle value, and then perform a “walk test”
(described in “Walk test and adjustment”). If the walk test result
is satisfactory, the sensitivity does not require further adjustment.
Advanced settings
The
Properties
page in Composer Pro allows for advanced
configuration of motion sensor and light sensor properties.
Several characteristics of the motion sensor can be programmed
and are described in the following diagram:
Troubleshooting
To remove the motion sensor from the network and restore
factory settings:
1
Remove power from the device.
2
Press and hold the ID button while returning power.
3
Continue to hold the ID button until the LED turns solid
orange, then release the button. The motion sensor is now
restored to factory configuration.
If the motion sensor is not working properly:
1
Restart the motion sensor by removing the batteries or
power supply and then returning power. Power must be
removed for at least 10 seconds to ensure a proper reboot.
Additional resources
The following resources are available for additional support:
• Control4 Knowledgebase and forums
• Control4 Technical Support
• Control4 website:
www.control4.com
• Composer documentation available at
ctrl4.co/docs
.
For the latest version of this document, open this URL or scan
the QR code on a device that can view PDFs.
Regulatory/Safety information
To review Regulatory information for your particular Control4
products, see the information located on the Control4 website at
ctrl4.co/reg
.
Patent information
Applicable patents are available at
ctrl4.co/patents
.
Warranty
Visit
ctrl4.co/warranty
for details.
DOC-00214-A
2016-06-15 MS
Copyright ©2016, Control4 Corporation. All rights reserved. Control4, the Control4 logo, the 4-ball logo, 4Store, 4Sight, Control My Home, and Mockupancy are registered
trademarks or trademarks of Control4 Corporation in the United States and/or other countries. All other names and brands may be claimed as the property of their
respective owners. All specifications subject to change without notice.
A
DATA SHEET
ctrl4.co/
wirelessmotion-ds
MOST RECENT VERSION
ctrl4.co/
wirelessmotion-ig
