19
If you choose to edit the Treb Freq field, a
new menu is displayed at the bottom of the
screen, which includes the options Down,
Up, OK, and Cancel. You can use these
menu options to change this setting or
continue using the Select Dial as you have
previously done.
4c.
Press the Select Dial to enter Edit mode.
4d.
Rotate the dial to change the setting. Press the
dial to save the new setting and exit the Edit
mode. To exit without saving, use the front panel
button indicated to choose Cancel.
4e.
Press a menu button to view a new screen:
Outputs:
Returns to the previous Output
screen.
Exit:
Returns to the In to Out Assignments
screen.
View or Change Input Settings
1.
On the In to Out Assignments screen, press the
Setup button to display the Output screen.
2.
From the Output screen, press the Inputs button to
display the assigned Input screen (similar to the
following screen).
From here you can change the Gain setting or
choose one of these menu options.
Outputs:
To toggle back to the Output screen
Exit:
To return to the In to Out Assignments
3.
(Optional) Change the Gain on an input source in
order to balance unequal source levels by reducing
the levels of any louder sources: Use the Select Dial
to highlight, select, and change this setting. This sets
the input attenuation. Supported range is -6 to 0 dB.
