Description of application and parameters
Application program
40
Options:
00:00:05 .. 00:00:30 .. 18:12:15
– Here it is specified how often the brightness is sent on the bus.
Options:
No
Yes
–
No
: There is no separate LED object.
–
Yes
: There is a separate 1-bit LED object (input) for the option of switching on the LED via
an On telegram and to switch it off with an Off telegram.
NOTE
Only the LED has been switched. This does
not
place the device into
programming mode.
Options:
No
With daylight adjustment
–
No
: It is not necessary to calibrate the internal brightness sensor.
–
With daylight adjustment
: This adjustment is used mainly for the detector application.
Options:
No
Yes
–
No
: Only the most important parameters for setting the brightness detection are displayed.
–
Yes
: All parameters are displayed, also those that are not required in most cases.
■
Extended parameters
NOTE
The following parameters are visible only when parameter "Fade in extended
parameters" is set on "Yes".
