Reading the LEDs
When an LED is enabled in Composer, the
default color scheme is as defined on the
device itself (shown in this figure). The same
information is also outlined in the following
table.
Table 5.
LED Color Descriptions
Control4 Technical Support
Care and Cleaning
WARNING!
Unplug device before cleaning. Do NOT use any
chemical cleaners to clean the switch. Clean surface with a soft damp
cloth as needed.
Regulatory Compliance
This product complies with standards established by the following regulatory and test bodies:
•
Federal Communications Commission (FCC)
•
Industry Canada
•
Underwriters Laboratories Inc. (UL)
•
Canadian Standards Association (CSA)
FCC
FCC ID: R33C4AM20
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into a wall outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT!
Changes or modifications not expressly approved by Control4
could void the user’s authority to operate the equipment.
Industry Canada
This Class B digital apparatus complies with Canada ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC: 7848A-C4AM15120
Edison Test Labs.
This product has been tested by ETL and found to comply with:
•
UL 916, 3rd Edition, “Energy Management Equipment”
•
CSA C22.2 No. 14-95, “Standard for Clock-Operated Switches”
Limited 2 Year Warranty
Control4 Corporation (“Control4”) warrants that at the time of first-consumer sale, this product
will be free from defects in material and manufacture. Control4 further warrants that for a
period of 2 years (24 months) after initial consumer sale, the product will function in
accordance with its specification, provided that it is installed and maintained under normal and
proper use. This warranty extends only to products purchased directly from Control4 or an
Authorized Control4 Reseller. If the product proves to be defective in material or workmanship
during the warranty period, it may be returned to the place of purchase and Control4 will, at its
sole option, repair or replace the product with a like product. This warranty provides the
consumer purchaser with specific legal rights, which may vary per state or country. For
complete warranty information, including details on consumer legal rights as well as warranty
exclusions, visit www.control4.com/warranty.
About this Document
United States Patents Pending. Copyright © 2008 Control4 Corporation. Control4 and the
Control4 logo are registered trademarks of Control4 Corporation. All trademarks are properties
of their respective owners. Part Number: 200-00084 Rev B (Draft 1)
LED Label
LED Status
Description
LED 1:
Conservation
Status
Green =
Conservation Planning
(VeryHigh Renewables/Low Cost)
Yellow =
Normal Conservation
(High Renewables/Medium Cost)
Orange =
Significant Conservation
(Medium Renewables/High Cost)
Red =
Maximum Conservation
(Low Renewables/Very High Cost)
Blinking Red =
Emergency Demand Reduction Event
LED 2:
Power
Consumption
Green =
Idle Mode, Current consumption is <600 W/h
Yellow =
Current consumption is < 600 W/h
Orange =
Current consumption is >1200 W/h
Red =
Current consumption is >1800 W/h
LED 3:
Device
Status
Green =
Normal Operation
Red =
Conservation Event; Device is Off
Red Blinking =
Conservation Event; Device will turn off
when cycle is complete.
Black or
No Color=
Not communicating with the Control4 home
automation system.
