About this Document
©2010 Control4. All rights reserved. Control4, the Con-
trol4 logo and Everyday Easy are registered trademarks
or trademarks of Control4 Corporation in the United
States and/or other countries. All other names or brands
may be claimed as property by their respective owners.
Pricing and specifications subject to change without
notice. Part Number: 200-00154 Rev C, 11/08/2010
Install Multiple Sony 400 Disc MegaChangers
in a Control4 System
When installing multiple Sony 400 Disc MegaChangers
in a Control4 system, follow these guidelines:
1. Set up multiple Disc MegaChangers as supported by
the Control4 Controller. Home Controllers support up
to four (4) disc changers, depending on the model.
2. Use the provided serial cable and installation instruc-
tions to connect the Sony 400 Disc MegaChanger
directly to an available Home Controller serial port.
3. Each Sony 400 Disc MegaChanger must be con-
nected directly to the Control4 Controller. No daisy
chain connections are supported.
4. If using a Sony Controller product that controls mul-
tiple Sony 400 Disc MegaChangers or other Sony
equipment, connect the Sony Controller product
directly to the Control4 Controller. Connect the other
disc changers as directed in the Sony installation
instructions.
Warranty
Sony provides the warranty for the Sony BDP-CX-
7000ES 400 Disc MegaChanger.
For more information, please see the enclosed Sony
Warranty Reference Card.
IMPORTANT
: Before you plug in the serial cable, follow
Sony’s instructions to enable the serial port using Sony’s
remote.
