3
C H A P T E R
1
Introduction to Multi
Channel Amplifier - 16
Multi Channel Amplifier - 16 can operate independently or
as a device you can control with your Control4 system. It
is used when the installation requires remote placement
of amplifiers and/or special power requirements.
This Multi Channel Amplifier is intended for use in a
Control4 system and is typically used in conjunction with
the Audio Matrix Switch or a controller.
This chapter introduces the Control4 Multi Channel
Amplifier - 16 and its features.
Features and Benefits
`
Receives up to 16 mono or 8 stereo inputs.
`
Outputs 16 mono or 8 stereo class D amplified
channels at 100 watts per channel.
`
Front display for adjusting zone settings and routing
sources (includes an LCD, supporting buttons, and a
selection dial)
`
Adjustable gain, treble, and bass for each zone.
`
Master Volume Control for all outputs.
`
Control4 EZ ID
™
LEDs for every I/O to make
connections easy to identify.
`
Device chassis is three standard rack spaces and
rack mountable configuring to EIA 19” rack standards
(its dimensions are 5.25” x 17.34” x 14”).
`
Communicates via Ethernet 10/100 port and ZigBee
mesh networking (802.11.15).
`
Backlighting feature turns on with any button push or
Select Dial push and stays lit for a preset time (default
is 30 seconds).
Summary of Contents for AVM-16A1-B
