background image

Manual Ca-HT-SMallOnE

Seite 

]

3. 

sYsTem connecTIon

3.1. 

Usage Precautions 

• 

System should be installed in a clean environment and has a prop temperature and humidity.

• 

All of the power switches, plugs, sockets and power cords should be insulated and safe.

• 

All devices should be connected before power on.

3.2. 

system diagram

3.3. 

connection Procedure

Step1.  Connect HDMI source (such as Blue-ray DVD) to HDMI IN port of transmitter with HDMI 

cable.

Step2.  Connect HDBT OUT port of transmitter and HDBT IN port of receiver, with single CAT5e/CA-

T6a cable.

Step3.  Connect HDMI displayer (such as HDTV) to HDMI OUT port of receiver with HDMI cable.
Step4.  Both transmitter and receiver have IR IN and OUT. When one end is used as an IR receiver, 

the signal sent from the end can only be transmitted via the other end.

For example: When “IR IN” of transmitter connects with an IR receiver, the IR transmitter must con-

nect to IR OUT of Receiver.

Step5.  Connect the RS232 port of the devices to be controlled and the receiver or the transmitter.
Step6.  Connect with DC24V power adaptor(s) (One is enough if transmitter is connected with adapter 

as its PoH function).

Summary of Contents for CA-HT-smallONE

















Reviews: