12
S AV E T H E S E I N S T R U C T I O N S
EN
INSTALLATION INSTRUCTIONS
Leveling your refrigerator
•
Your refrigerator must be level in order to
function correctly. If your refrigerator isn’t
leveled during installation, the door may not
close or seal correctly and cause cooling, frost,
or moisture problems.
•
To level your refrigerator, turn the leveling foot
clockwise to raise a side of your refrigerator or
turn it counter-clockwise to lower a side.
Note:
Having someone push against the top of
your refrigerator helps to take some weight off
the leveling foot and makes it easier to adjust.
9. Install the leveling foot you removed from
the left side into the right bottom of your
refrigerator.
10.
Install the bottom hinge
on the left bottom
of your
refrigerator using the screws you
removed
previously. Tighten the screws.
11. Align the hole in the bottom left of the
refrigerator door with the bottom hinge pin,
then install the door on the hinge pin.
12. Place the top hinge pin into the top of the
refrigerator door, then install the top hinge
on the top left of your refrigerator with the
screws you removed previously.
13. Check the fit and alignment (vertical and
horizontal) of the door to make sure that the
door freely opens and closes, then tighten
the screws holding the top hinge.
14. Install the screw covers you removed
previously into the holes in the top right of
your refrigerator.
15. Adjust the leveling feet to level your
refrigerator.
Installation Instructions