Section Header
7
Section Header
7
®
ther
M
2
Mode select
therM
2
can either be used as a thermostat or a time clock.
Thermostat mode is the default setting.
To change between thermostat & time clock modes, follow these steps.
• Use the left / right keys to scroll to setup .....................................................
• Press and hold the tick key for 5 seconds .................................................................
• Use the up / down keys to scroll between modes .......................................
• Press the tick key to confirm selection ......................................................................
therM
2
will reset all parameters and restart in the selected mode.
Note: The mode select function will reset all parameters that were entered during
the set-up and pairing operations. These processes must be repeated after the
restart has completed.
Summary of Contents for therM2
