4
PC150H Component Identification
Crimper Head
Manual
Back Stop
Reservoir
8 Lubrication Fittings
Hold / Release Valve
Vent Plug
Oil fill
Tank Drain and
Oil Level Sight Glass
Do not operate the PC150H until you have read and fully understand this manual and the proper use
of the crimper.
This manual is applicable to the PC150H-1HP-1P and PC150H-2HP-1P crimpers. Crimpers
are identical in component and crimping procedures. Note that the PC150H-1HP-1P and PC150H-2HP-1P
require different electrical hookups as power requirements differ from 110V to 220V, respectively.
Hold / Release Valve
Metric Dial Micrometer
Pneumatic Switch
Electrical Cord
The 1 HP motor delivers the
power needed to get the job
done quickly
Power Switch
Close push button
Voltage Tag
Continental QR code
Large opening allows right
angles and special fittings
to be inserted
Retraction Stop:
•
When making repetitive crimps, setting
the Retraction Stop at a point where the
hose and fitting can be conveniently
withdrawn without allowing the cylinder to
fully retract will greatly reduce the crimp
cycle times.
Back Stop:
•
When making repetitive crimps,
setting the Coupling Stop eliminates
the need to visually align the couplings
each time.
For repetitive crimps, position the hose
and fitting in the correct position and
bring the face of the coupling stop
against the fitting. Tighten the coupling
stop in the correct position.
