Page 3:
LED Status Definition
LED Status
Meaning
LED 1
–
Green Solid
The vehicle is powering the device.
LED 2
–
Blue Blinking
The device is trying to establish the 4G LTE
cellular connection.
LED 2
–
Blue Solid
The device has established the 4G LTE cellular
connection.
LED 1 & LED 2
–
Blinking alternately
The device is being configured for your vehicle.
LED 1 & LED 2
–
Both solid
The device was configured successfully and is
ready to transfer data.
Page 4:
Read Before Starting
The Remote Vehicle Data (RVD) OBD device can be used in any private or light commercial motor
vehicle that has an OBDII interface.
Pure electric vehicles (EV) are currently not compatible with this OBD device. However, Plug-In
Hybrid vehicles are supported.
On some vehicles mounting modifications could be required to secure the device i.e. removing of
panels.
For such cases two different harnesses are available and need to be purchased separately.
1.)
Simple OBD extension to place your device away from the engine diagnostic port
’s location
2.)
Y-type harness to keep the diagnostic port exposed
The Y-type harness requires completion by a Professional Installer to ensure a secure installation.
An unsecure device installation can cause poor electric and/or data connection that can lead to short
circuits and fires or cause malfunctions of vehicle controls that can result in serious personal injury or
significant damage to your vehicle.
Page 5:
Get the RVD Connect Web App
You will need the RVD Connect Web App to be able to onboard 4G OBD Dongle. Follow the link
below to access the RVD Connect Web App supporting the configuration of your OBD device for your
vehicle:
[Fixed link will be provided here]
Attention: Do not plug the device into your vehicle until the RVD Connect Web App instructs you
to do so.