14
W415-0814 / A / 03.17.11
Combustible materials may be installed fl ush with the front of the appliance but must not cover any of the black
face-areas of the appliance. Non-combustible material (brick, stone or ceramic tile) may protrude in these
areas.
It is not necessary to install a hearth extension with this appliance system.
When roughing in the appliance, raise the appliance to accommodate for the thickness of the fi nished fl oor ma-
terials, i.e. tile, carpeting, hard wood, which if not planned for will interfere with the opening of the lower access
door and the installation of many decorative fl ashing accessories.
Objects placed in front of the appliance should be kept a minimum of 48" away from the glass front faces.
5.3.2 BRICK PANEL INSTALLATION
Install the base panels as illustrated in steps 1-4, see "PENINSULA
INSTALLATION PROCEDURE" section. The side panel sits under the
bracket tab. Holding the side panel in position, bend down the tab to
secure.
DETAIL 6.
STEP 5
STEP 6
RETAINER
DETAIL 6
Refer to "FINISHING" section for complete instructions regarding
log placement, glass door and upper and lower louvre attach-
ments.
DRYWALL
4" MIN
DRYWALL
5.3.3 FACING
5.3.4 FINISHING
