W415-2369 / C / 12.09.20
EN
54
finishing
10.7 log placement
!
WARNING
48.3
• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
• The logs are fragile and should be handled with care.
If applicable, insert the following statement:
“
PHAZER™
logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
more uniform as colour pigments burn in during the heat-activated curing process.”
note:
Log numbers are located on the bottom or back of the logs.
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
Burner Overview
IF APPLICABLE, USE THIS BOX TO SHOW
“NATURAL GAS ONLY” LOG PLACEMENT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
IF SPACE IS LEFT OVER, USE THIS BOX TO
SHOW CORRECT FINAL LOG
PLACEMENT WITH PHOTOS.
IF NOT, USE BOXES AS ABOVE.
IF SPACE IS LEFT OVER, USE THIS BOX TO
SHOW CORRECT FINAL LOG PLACEMENT
WITH LINE DRAWINGS.
IF NOT, USE BOXES AS ABOVE.
Propane Models Only:
Natural Gas Models Only:
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
PLACE TEXT BOX HERE.
NOTE:
ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
IF APPLICABLE, USE THIS BOX TO SHOW
“PROPANE ONLY” LOG PLACEMENT.
Insert only if
applicable ---->
Log Number
Part Number
Description
1
2
3
4
5
6
7
8
9
10
PHAZER™
logs and glowing embers, exclusive to Continental, provide a unique and realistic glowing effect
that is different in every installation. Take the time to carefully position the glowing embers for a maximum
glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become more
uniform as colour pigments burn in during the heat-activated curing process.
C.
Place the right log (W135-0545) onto the two
studs located on the right side of the log
support.
D.
Place the left crossover log (W135-0546) onto
the pin located in the left side of the rear log,
allow it to rest in the notch of the left log.
B42
B42
B
A
C
B
A
C
D
A.
Place the rear log (W135-0620) firmly onto the
two studs located at the rear of the support
tray. Ensure the log sits flat and does not cover
the pilot opening. Place two pins in holes
located on the top of the rear log.
B.
Place the left log (W135-0544) onto the two
studs located on the left side of the log support.
B42
B42
B
A
A
PIN
PIN
E.
Place the right crossover log (W135-0547) onto
the pin located in the right side of the rear log,
allow it to rest in the notch of the right log.
F.
Reinstall the door and safety screen, refer to
the video tutorial or your installation manual for
installation instructions.
B42
B
A
C
D
E
