background image

 

 

 CLEANING 

 

 

Before cleaning please remove the power cord from the socket. 

 

Do not immerse the housing with motor in water. 

 

Do not use any abrasive detergents. 

 

Please only use a damp to clean the outside of the housing. 

 

Components that have come into contact with food can be cleaned in 

soapy water. 

 

Allow the parts to dry thoroughly before reassembling the device. 

 

 

TECHNICAL DATA 

Item reference: CERM600B 

Model: CY-363 

Rated voltage: 220-240V~, 50/60Hz   

Power consumption: 600W 

Protection class: II   

Lot #: amc102019 

 
 

 PROPER DISPOSAL 

 

This product contains recyclable materials. 

Do not dispose this product as unsorted municipal waste. 

Please contact your local municipality for the nearest collection 

point. 

 
 

 TROUBLESHOOTING 

 

PROBLEM   

 EASY SOLUTION   

Machine does not 

work 

* There is a safety interlock switch on processing 

bowl / blender. Please sure bowl and lock are 
securely locked into position.                                     

* If the motor still will not start, check the power 

cord and power outlet.     

French Fried 

Potato Julienne 

Disk     

* Always clear any blocked potato from the 

chipper disc before processing more potatoes.     

Some food remains 

on the disc after 

processing     

* It is normal for small pieces to remain after 

processing.     

Motor slows down 

when mixing 

dough     

* Amount of dough may exceed maximum 

capacity. Remove half and process in two batches.   
 

Summary of Contents for CERM600B













Reviews: