14
III.INSTALLATION
A.Unpacking
Your TV should be unpacked and handled by 2 people, to avoid any risk of deformation
or impact on the LED display.
Start by preparing a flat surface covered with a soft, thick fabric (a blanket, for example).
The prepared surface area must be larger than the size of the TV. This will allow the TV
to be laid flat with the LED screen facing the floor.
Before removing the TV from its packaging, read the sections "Wall Mounting" and
"Stand Legs Installation" to prepare yourself for the installation operation you have
chosen.
Remove the TV from its packaging by lifting it vertically, then place the TV screen flat on
the previously protected flat surface so that either the stand legs or a wall mounting
bracket(not included) can be attached.
Packaging materials
- The packaging cardboard is recyclable.
- The materials marked with the symbol are recyclable.
- >PE<=polyethylene; >PS< = polystyrene; >PP< = polypropylene; ... This means
that they can be recycled by disposing of them in appropriate collection containers.
- Other packaging elements (adhesive,fasteners,etc.)should be disposed of with
household waste.
For more information:www.quefairedemesdechets.fr
B. Wall mounting
·Contact a professional for assistance with the wall mounting of your TV set. We cannot be
held liable for any damage or injury caused by the mounting of the TV set.
· The TV must be mounted on a vertical wall. This TV is not intended for installation on a
sloped wall.
·The TV must be tumed off and disconnected from the power supply when you mount it to
the wall. Failure to comply with these precautions may result in electric shock or electrocution.
·The mounting bracket must correspond to the centre distances indicated below.
NOTE: The screws supplied are used for fixing the stand legs only. If you want to mount the
TV on a wall, contact a professional to find out how to install a wall bracket.
Rear view of your TV set
