![background image](http://html.mh-extra.com/html/continental-edison/cecuf235nfw/cecuf235nfw_user-manual_2656710018.webp)
4
Installing the Door Handle
1. Remove the screw hole covers
on the side of the door.
There will be 2 designated holes for the handle to be installed.
2. Align the screw holes of the door handle to those on the side of
the door.
3. Tighten the screws to fix the handle to the door.
4. Assemble the screw covers to the screws.
AMBIENT TEMPERATURE
This appliance is designed to operate in ambient temperature between 10°C and 43°C. If these temperatures are exceeded, i.e. colder or warmer, the
appliance will not operate correctly. If the ambient temperatures are exceeded for long periods, the temperature in the freezer compartment will rise
above -18°C and food spoilage may occur.
BEFORE PLACING FOOD IN THE APPLIANCE
Remove all packaging.
Allow the appliance to run empty for 2 – 3 hours so the compartments can cool to the appropriate temperature.
Clean the inside of the appliance with warm water and a little liquid detergent to remove manufacturing and transportation dust.
POWER FAILURE
If there is a power failure, do not open the appliance door. Frozen food should not be affected if the power failure lasts for less than 15 hours.
Do not refreeze frozen foods that have thawed completely. The food may be dangerous to eat.
• Before connecting your device to a power supply, allow it to stand upright for about 2 hours. This reduces the risk of malfunction of the refrigeration
system due to handling during transport.
• Clean the inner surfaces of the unit with a soft cloth and warm water.
• Place your unit on a floor strong enough to support the weight of the fully filled unit.
• Make sure the unit is level by adjusting the front feet underneath the unit. Make sure that the cellar rests on its feet in a stable manner.
• Install the appliance away from direct sunlight and heat sources (radiator, hot plate, etc.). Direct sunlight can damage the unit's coating and heat
can increase its power consumption. If the ambient temperature is extremely cold or hot, this may prevent the unit from operating properly.
• The unit is not designed to be installed in a basement or appliance.
• Caution: Make sure that the unit is kept away from any substance that may cause combustion.
• Check that the water tank is in place before connecting the unit.