Failure Display and Inspection
If an abnormality comes up, the induction hotplate will enter the protective
state automatically and display corresponding protective codes:
Troubles
Possible reasons
Solutions
F0-F2
Fan failure.
Please contact the supplier
Power on, and then restart after the
temperature around returns to be
normal.
F3-F8
Thermistor
component
failure.
Please contact the supplier.
Power on, and then restart after the
temperature around returns to be
normal.
F9-FE
Temperature sensor of
the IGBT failure.
Please contact the supplier.
Please
inspect whether power
supply is normal.
E1-E2
Abnormal supply voltage.
Please contact the supplier.
Please inspect the pot.
Please restart after the hotplate
cools down.
E3-E4
Abnormal temperature.
Please contact the supplier.
Please restart after the hotplate
cools down.
E5-E6
Bad
hotplate
heat
radiation.
Please contact the supplier.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hotplate.
16
Summary of Contents for CECP551FSA
