3
Conti Sanitärarmaturen GmbH, Hauptstraße 98, 35435 Wettenberg | Telefon: +49 641 98221 0 | Fax: +49 641 98221 50 | [email protected]
www.conti.plus | gültig ab 01/2018 | Artikelnummer CONDOK0030011 | Druckfehler und Irrtümer sowie technische und maßliche Änderungen vorbehalten
Important
BE SURE TO READ THE ATTACHED SAFETY
INSTRUCTIONS BEFORE INSTALLING AND
COMMISSIONING THE SYSTEM / PRO-
DUCT.
INCORRECT INSTALLATION CAN CAUSE
MALFUNCTIONS AND DAMAGE AND BE-
COME A DANGER FOR THE USER AND
SPECIALIST CRAFTSMEN.
THE MANUFACTURER DOES NOT ASSUME
ANY WARRANTY FOR IMPROPER OPERA-
TION AND IMPROPER USE.
Electrical wiring and installations must be car-
ried out by a qualified electrician in accordan-
ce with DIN VDE 105-100.
Only insert cables at specified positions. As-
sumption of warranty only if the specified ca-
ble types are used.
Observe VDE 100-701 when installing central
control units.
| Install coin-operated machines in a
splash-proof vestibule
| Installation of control cabinets in drying
room
At water temperatures above 45°C there is a
risk of scalding!
The worksheet DVGW W551 must be obser-
ved!
To avoid damage to functional components,
malfunctions and water damage, comply with
operating pressures in accordance with speci-
fied technical data.
Disconnect the water supply before assembly
and disassembly of water-bearing compo-
nents and fittings.
Before and after installation, flush pipes in ac-
cordance with DIN EN 806-4 or ZVSHK leaflet
"Flushing, disinfecting and commissioning of
drinking water installations".
Store product in a frost-free, dry environment.
Check the fixing material in the scope of deli-
very for usability for current wall condition.
Only use stainless steel fixing screws.
Observe maintenance and repair obligations
in accordance with VDI/DVGW 6023 or DIN
EN 806-5.
Observe DIN 1988-200 or VDI/DVGW 6023
when temporarily shutting down valves or
other water-bearing components.
Do not insert or swallow small parts such as
screws, seals or other metal or plastic parts
into the body! This can lead to health dama-
ge, even life-threatening situations!
Before cleaning components, always read the
instructions for use of the cleaning agent!
Consult a qualified specialist before using the
cleaner.
The use of CONTI+ spare parts from other
manufacturers may result in damage to the
component and will void the warranty imme-
diately.
IMPORTANT:
This product is subject to the
provisions of the Electrical and
Electronic Equipment Act in ac-
cordance with WEEE guidelines.
You can request the manufacturer's decla-
rations of conformity, test reports, technical
certificates and further information from us.
All documents are also available on our web-
site www.conti.plus
