Scanning
40
Oversize scanning Wizard (scanner)
1. Place the long-edge of the document against the guide edge with
the top corner meeting the lower corner of the hatched area
(inset). The document lower section can hang over the front of
the scanner.
2. Now close the lid and press the Wizard scan button on the
computer or use the scan button on the scanner screen to begin
the first scan pass.
3. Now open the scanner lid to 30
0
and move the document toward the
hinge of the lid so that the lower-left corner lines up with the long
arrow (inset) at the front and the opposite end passes out through the
scanner at the back.
4. Now close the lid and press the scan button to complete the scan.
32
