Page 6
1000W DMX smoke machine with HF remote control and Timer
English
4-3 : The wired remote control
1
2
5
4
3
1 - Timer On/Off
Activates/deactivates the timer.
This function allows you to program regular intervals
between each smoke projection.
It is especially useful if you want to produce a
homogeneous cloud of smoke without using too much
smoke fluid.
2 - Duration
Only available in Timer mode. Allows you to configure
the duration of smoke projections.
3 - Interval
Only available in Timer mode.
Allows you to adjust the interval between smoke
projections..
4 - Manual Fogging
Allows you to control manually the smoke output. This
function takes priority over the Timer function.
5 - Power On/Off
This button activates the remote control.
- The LED will stop flashing and stay lit in green if information are received.
- In order to use the same remote control to pilot several units, turn on all the units simultaneously and
proceed as described above.
- The receiver will keep the last parameters used if no remote control is detected.
Note
:
- The receiver will delete the previous remote controls when trying to link a new remote control while 5 remote
controls have already been linked.
5 - DMX Configuration
Your Smotec1000 features a DMX interface allowing you to control it via a universal DMX remote control.
It only requires one DMX channel, controlling the smoke output. The DMX values are as follows:
DMX Value
Effect
129 - 255
On : Smoke output activated
000 - 128
Off : No smoke