PIX9W14
- 4x9W TRI LEDS light bar with LCD display
Page 5
English
4 - Description
1
Power input socket
Allows you to plug the projector.
Please make sure the voltage is in adequation with the product
indications.
Fuse : If need to replace the fuse, please make sure the new
fuse has exactly the same characteristics as the original one.
2
Display
This intuitive display allows you to configure your projector.
Please refer to the next paragraphs for more details about the
projector configuration.
3
Power output socket
Allows you to daisy chain up to 20 projectors with an IEC cord.
4
DMX OUT
3-pin female XLR plug hardwired as follows :
- Mass: 1
- Negative signal: 2
- Positive signal: 3
5
Menu buttons
MODE
button
Allows you to access menus and select a function
.
ENTER
button
Allows you to configure the parameters of the functions chosen
with the MODE button.
UP and DOWN buttons
Allow you to increase/decrease the adjustable values or browse
the submenus.
6
DMX IN
3-pin female XLR plug hardwired as follows :
- Mass: 1
- Negative signal: 2
- Positive signal: 3
1
5
2
3
4
6
DMX IN
DMX
OUT
4 x 9W Tricolor Pixel Bar
PIX
9W14
