PILOT-8
- 8-channel intelligent DMX controller
Page 14
English
3.15 - Using the optional EASY-2 remote control
1 -
Press the
BLACKOUT/REMOTE
button for 3 seconds or the
STANDBY
button of your remote
control for 2 seconds to activate the remote control function. The MODE LED of your remote
control will light up while the
BLACKOUT/REMOTE
button of your console will flash.
2 -
The
FUNCTION
button allows you to select sequences when the MODE LED is light up (not
flashing).
3 -
Pressing the
MODE
button until the corresponding LED flashes will give you access to step mode.
The
FUNCTION
button allows you to browse manually through the selected sequence steps.
4 -
Press the
MODE
button until the corresponding LED lights off will allow the
FUNCTION
button to
activate the full power mode. The console display will then indicate
On
.
5 -
In order to activate the music-sensitive mode, press the
MODE
button until the MUSIC LED lights
up. The selected sequence will then be music-sensitive.
6 -
The main dimmer will be the only active function of the console while the remote control is activated.
