irLEDs series -
LED PAR projectors with infrared remote control
Page 6
English
4 - Description
1
Power input/output socket
Allows you to connect the projector to an electrical
outlet and to link several projectors together via a
Male/Female IEC cord.
Please make sure the voltage is in adequation with
the product indications.
Attention
: Do NOT go over 700W on the same
power source.
2
Fuse
If need to replace the fuse, please make sure the
new fuse has exactly the same characteristics as the
original one.
3
DMX output
3-pin male XLR plug hardwired as follows :
- Mass: 1
- Negative signal: 2
- Positive signal: 3
4
DMX input
3-pin female XLR plug hardwired as follows :
- Mass: 1
- Negative signal: 2
- Positive signal: 3.
5
Display
This intuitive display allows you to configure your
projectors. Please refer to the next paragraphs for
more details about the projectors cojnfigurations.
6
MODE button
Allows you to access menus and select a function.
7
UP button
Press UP to increase the adjustable values or browse
the sub-menus.
8
DOWN button
Press DOWN to decrease the adjustable values or
browse the sub-menus.
MODE
UP
POWER IN 240V/50Hz
POWER OUT 240V/50Hz
DOWN
DMX IN
DMX OUT
5
6
8
4
7
3
2
1
