English
FUSION180
- 180W Beam, Wash and Spot moving head
Page 6
6 - Menus
This menu allows you to set the initial DMX address, visualize the DMX values of each channel and select the current
mode.
Menus allow you to configure your projector in order to adapt it to any kind of situation.
Press
MODE to access menus
.
Use the navigation buttons to navigate through menus and sub-menus. Press ENTER to access a menu.
Use the
and
buttons to change values.
Press
ENTER to save changes
.
You can go up the menu tree or leave menus by pressing MODE.
Please note:
Values in bold are the default values.
• Press BATT for 2 seconds to access menus when your projector is deactivated.
• The display automatically turns off after a 1-minut period of inactivity.
• When browsing menus, values in white are the current values. When entering a new value, it will appear red as long as this
choice as not been validated by pressing ENTER.
6.1 Function menu
Sub-menus
Values
Description
Address
Set Address
From
A001
to AXXX
Configures the DMX address.
The projector automatically enters DMX mode upon
configuration of its DMX address.
Slave Set
Slave 1
, Slave 2, Slave 3
Allows you to determine the behaviour of your
projector in slave mode.
Program
Auto
Alone
, Master
Determines if your projector will operate Alone or as
Master unit upon entering Auto mode.
Sound
Alone
, Master
Determines if your projector will operate Alone or as
Master unit upon entering music-sensitive mode.
